Pocket Alcohol Tester

Description

POCKET ALCOHOL TESTER

Range: Low & 0.2 ~ 1.5 %BAC
Accuracy: ± 0.2‰ BAC at calibrated point (alert level)
Power input: 2 x 1.5V AAA batteries (not included)
Display: Digital display
Tolerance compensation: pre-alert function when close to alcohol limit
Auto power off: 2 minutes
Breath sampling with auto flow detect: about 6 sec. continuous breath sample
Cycle time: about 20 seconds

Instruction for use
1) Install 2 x 1.5V AAA Alkaline batteries into the battery compartment
2) Wash your mouth with WATER before using. Abstain from smoking or drinking alcohol for
at least 15 minutes.
3) Pressing the START Key 0.5 second to turn on the power,
sensor pre-heating will be activated for an approximate
14 seconds and the display counts down.
4) “ BLOW” flashes with a beep tone when count down to zero.
5) Press & hold the START Key and blow continuously for
approximately 6 seconds. “BLOW” and keep the
tester 1/2 inch (12mm) away from the mouth while blowing.
stop blowing when you hear a single beep tone and
the reading will then be shown on the display.
6) When low battery inductor flashes, the reading is not valid,
please replace the batteries immediately